Table of Contents
Advertisement
3-12
3. Basic Functions
Manual Bypass Copying
• Use the Manual Bypass to make copies on paper not loaded in any tray, or to copy onto OHP
transparencies or any other special paper.
• The setting of copy paper sizes is needed for manual bypass copying.
• Manual Bypass cannot be used for a reserved job.
Copy Paper that Can be Used for Manual Bypass
Types of Paper
• Plain paper
Thin Paper (64 g/m
• Thick paper
Heavy Stock 1 (91 g/m
• Postcard/A6L Size (158 g/m
• OHP Transparencies (recommended brand)
Paper Size
• A3L to A5L and A3 wide
• Postcard/A6L
• Max. Size: 297 mm 432 mm
• Minimum Size: 148 mm 182 mm
Capacity of the Manual Bypass Tray
• Plain paper, Heavy Stock 1 ... Up to 50 sheets
• Plain paper (once-copied paper) ... Up to 20 sheets
• Heavy Stock 2, OHP transparencies ... Up to 20 sheets.
Using the Manual Bypass Tray
Place the original on the Original Glass.
1
Swing down the Manual Bypass Tray.
2
Insert a neat stack of copy paper into the
3
Manual Bypass Tray until it stops and slide
the Paper Guide Plates to the size of the
copy paper.
2
2
to 74 g/m
), CF Paper (75 g/m
2
2
to 105 g/m
), Heavy Stock 2 (106 g/m
2
2
to 190 g/m
)
1144O012AA
1144O013AA
2
2
to 90 g/m
)
2
to 157 g/m
NOTES
• Load the OHP transparencies so that the front
side (on which the white tape is fitted) faces up
in the direction as shown.
• Use only the recommended OHP
transparencies.
• Only CF Paper can be used for 2-sided copies.
• When inserting paper with one side previously
printed, load the paper stack so that the blank
side faces down.
• Make sure that the top level of the original
stack does not exceed the
2
)
1144O014AA
marking.
Advertisement
Table of Contents
