Manual Bypass Copying - Minolta EP2080 Operator's Manual

32

3. Manual Bypass Copying

Use the Manual Bypass to make copies on paper not loaded in any drawer, or to copy onto
transparencies, translucent paper, or any other special paper. When using the Multi Bypass Tray,
you can load multiple sheets of copy paper.
Copy Paper That Can be Used for Manual Bypass
Types of Paper
Plain paper (weighing 60g/m
Thick paper (weighing 90g/m
Transparencies, translucent paper
Paper Size
Max. Size: 297mm
Minimum Size: 100mm
Capacity of the Multi Bypass Tray
Plain paper ... Up to 50 sheets
Plain paper (once-copied paper) ... Up to 20 sheets
Thick paper, transparencies, translucent paper ... Up to 20 sheets.
Using the Multi Bypass Tray
Place the original on the Original
1
Glass and make the control panel
settings.
NOTE
The following functions cannot be
selected for Manual Bypass:
Auto Paper, Auto Size, Book, any of the
finishing modes other than Non-Sort,
2-sided copying, margin by reduction,
Erase, and 2-in-1 separation.
Swing down the Multi Bypass Tray.
2
Slide the Guide Plate to the size of
the copy paper.
Slide the Multi Bypass Tray Extender out
when using large-size copy paper.
2 2
to 90g/m )
2 2
to 157g/m )
432mm
140mm
3
1139O0130A
Load a neat stack of copy paper onto
the Tray and insert it until it stops.
NOTES
The paper should be loaded no higher than
the (Max. Level Indicator).
Before inserting, fan the paper stack well if
you are using transparencies or translucent
paper.
Correct any curl if you are using thick paper.
1139O0140A