Table of Contents
Advertisement
3-10
3. Basic Functions
We here explain how to select the basic settings to make copies.
Basic Screen
Density
key:
Touch this key to show
the screen that allows
you to select the image
density of the copy.
p. 3-17
Copy Paper Size
Auto Paper
When this key is touched, the copier is set to the
Auto Paper mode where the copy paper is
automatically selected according to the size of the
original being used and the zoom ratio selected for
use.
Paper
Touch
on the Basic Screen, then
1
touch
Auto Paper
Auto Paper mode.
Touch
.
OK
2
Useful Tip
This mode is efficient when you want to
automatically make copies on paper of the same
size as your originals.
NOTES
• When the original is placed on the Original
Glass, the original sizes that can be detected in
the Auto Paper mode are A3L, B4L, A4L, A4C,
A5L, B4L, and 8-1/4" 13"L. The copier may
fail to detect, or wrongly detect, any other
standard size and irregular sizes. (But, there
are optional parts that can be mounted to
enable detection of LetterL, LetterC, LegalL,
and 11"
17"L ; ask your Tech. Rep. for these
capabilities.)
• When using the Document Feeder, the original
sizes that can be detected in the Auto Paper
mode are A3L, A4L, A4C, A5L, B4L, LetterL,
LetterC, 8-1/4" 13"L, LegalL, and 11" 17"L.
(A5L cannot be used for the Mixed Original
Detection Mode.)
to set the copier into the
1154P139CA
• The copier fails to detect, or wrongly detect,
the size of a wrinkled, dog-eared, or curled
originals.
Manual Selection
The copy paper size can be set manually
according to your need.
Paper
Touch
and the Touch Panel
1
indicates the paper size currently loaded in
the three Paper Trays.
Touch the desired paper size key.
2
Touch
.
OK
3
Zoom
key:
Touch this key to
show the screen that
allows you to select
the zoom ratio.
p. 3-13
Paper
key:
Touch this key to show
the screen that allows
you to select the paper
size.
1154P142DA
1154P143DA
Advertisement
Table of Contents
