Table of Contents
Advertisement
5-16
6. User's Choice
This function allows you to select customized default settings that are automatically selected when the
copier is powered ON. It eliminates the need of making selections again to suit your needs every time the
copier is turned ON or the panel is reset.
User's Choice Functions
Item
Language
Select the language to be displayed on the Touch Panel. The initial setting is
English.
Energy Saver
Select whether to set the copier into the Energy Saver mode (ON) or not (OFF)
after a given period of time after the copy cycle has been completed or a key
pressed. When "ON" is selected, set the time to enter this mode, which can range
from 1 to 240 min., from the 10-Key Pad. The initial setting is "15 min."
Auto Reset
Select whether to reset the control panel settings (ON) or not (OFF) after a given
period of time after the copy cycle has been completed or a key pressed. When
"ON" is selected, set the time to activate this function, which can range from 1 to
9 min., from the 10-Key Pad. The initial setting is "5 min."
Confirmation
Select whether to turn "ON" or "OFF" the confirmation beep that sounds when
Beep
any of the keys on the Touch Panel is pressed. The initial setting is
Key Counter
Select whether to reset (ON) the control panel settings or not (OFF) when the
Plug-In Counter is unplugged or magnetic card is removed. The initial setting is
ON
Intelligent Sort
Select whether to turn the Intelligent Sort function ON (Auto Select) or OFF
(Non-Auto) to automatically switch between Sort and Non-Sort according to the
number of originals, when a copy cycle is run on a copier system equipped with a
Sorter and Duplexing Document Feeder, both activated. Non-Sort is selected
when the number of originals is 1 and Sort is selected when the number of
originals is 2 or more. The initial setting is
Custom 2in1
It is possible for you to set whether to automatically recall the copy paper and
zoom ratio previously stored in memory when 2in1 is selected. The default setting
is "Select" with settings of "Auto Paper" for Paper Source and " 0.707" for
Zoom.
ACS Judgement
Set the image level of the Auto Color mode towards monochrome or full color as
Level Adjust.
necessary. The initial setting is "Std."
Gamma-curve
If the copier is used as a full-color printer to print high-density documents for
limitation
computers, turning
Turning it
setting is
.
this function prevents image failures from occurring.
ON
OFF
enables a clear reproduction of high-density colors. The default
ON
.
Description
.
Auto Select
.
ON
Advertisement
Table of Contents
