Table of Contents
Advertisement
Remove the bottle cap and peel off the seal.
5
Open the Toner Hopper Lid.
6
NOTE
Make absolutely certain that the color of the
toner matches the color of the Toner Hopper Lid.
Align the tab on the Bottle with the cutout
7
on the Toner Receptacle and turn the Bottle
clockwise until it stops.
2. When the Message "Please add Toner." Appears
Wait until the toner stops falling in (approx.
8
60 seconds), then tap the Bottle a few times
to ensure that all the toner falls into the
Hopper.
1144L016AA
Making sure that the toner has emptied
9
completely, turn the Bottle counterclockwise
and lift it out from the Receptacle. Close the
Toner Hopper Lid.
1144L014AA
NOTE
Please wait for a while after the toner has fallen
in completely. If not, toner powder may be blown
up from the Toner Hopper.
Slide the Toner Hopper Unit back in and
10
close the Front Door.
1144L017AA
Use the same procedure to add toner for the
11
other three Main Hoppers.
6-5
1144L018AA
1144L019AA
1144L020AA
Advertisement
Table of Contents
