Table of Contents
Advertisement
4-34
3. Using the Digital Art Functions
<When the original is a photo size>
Touch
Postcard
on the Digital Art menu
1
screen.
Touch
Photo Size
2
Select the size of your photo and touch
3
OK
. If an appropriate size is not available,
enter the size from the 10-Key Pad.
<Using 10-Key Pad>
Touch
and enter the length of the photo
X
from the 10-Key Pad. (If a value has already
been set, press the Clear Key, then enter the
new value.)
Next, touch
Y
and enter the width of the
photo from the 10-Key Pad.
Useful Tip
A frequently used photo size can be stored in
copier memory.
p. 3-37
1154P237CA
.
1154P268DA
1154P249DA
In the # of sheets box, enter the number of
4
postcard sheets desired.
Useful Tip
Enter 1 for 4 postcards and 2 for 8 postcards.
Touch
.
OK
5
Place your original and paper as shown on
6
the Touch Panel and press the Start Key.
Useful Tips
Original
• Touching the
allows you to change the previous settings.
• Touch
C
(cancel) to cancel the settings made
for, and exit from, Postcard.
• For the copy paper for Postcard, consult the
service shop you purchased your copier from.
1154P250DA
1154P251DA
or
key
# of sheets
Advertisement
Table of Contents
