2. Meter Count
This function allows you to check the cumulative number of copies produced since the installation of
your copier.
Calling up Meter Count
Press the Utility key.
1
Touch
Meter Count
2
The Touch Panel shows the count data for
3
the copies made in full color and in black.
Utility
Job Recall
1154O011CA
.
1154P412CA
1154P414CA
When
Monotone
4
shows the count data for the copies made in
monotone.
When you have checked the count data,
5
touch
.
OK
Glossary of Touch Panel Terms:
• Total: Total number of copies made for all copy
paper sizes.
• Large: Number of copies made on large copy
paper of a preset size.
(The size will be set by your Technical
Representative.)
• Print: Number of prints made through a
controller by a computer.
• Full Color: Number of copies made in the full
color mode.
• Black: Number of copies made in the black
mode.
• Duplex: Number of 2-sided copies made using
the Duplex Unit.
• C/M/Y: Number of copies made in cyan,
magenta, or yellow in the monotone
mode.
• 3C Monotone:
Number of copies made in
a color other than cyan,
magenta, and yellow in the
monotone mode.
Printing the Meter Count Data
• To print the Meter Count data, place A4
paper on the Manual Bypass Tray and press the
Start key.
5-3
is touched, the panel
1154P415CA