Ohp Interleaving - Minolta CF910 Manual

OHP Interleaving

When you make copies on transparencies, the OHP Interleaving function inserts copied or non-copied
interleaves after each transparency. Four different functions are available. Select the appropriate one
according to your need.
Functions
Single Copy
The copier copies onto OHP transparencies and, after each transparency, inserts a copied or non-copied
(blank) sheet of paper.
Multiple Copy
The copier copies onto OHP transparencies and, for the 1st set, inserts a copied or non-copied (blank)
sheet of paper after each transparency. Also, the copier sorts copies into the specified number of original
sets.
<Copied Interleaves>
Copies
Originals
Multi-Copy
Entry: 2
OHP
NOTES
• OHP Interleaving function can be available only when the paper with the same size of the OHP
transparencies is loaded into any paper source.
• Be careful to place the original using the correct page orientation.
1. Using the Applied Input
<Non-Copied Interleaves>
Originals
1154O008AA
<Non-Copied Interleaves>
Originals
Copied
Interleaves
Multi-Copy
Entry: 2
Extra
Copies
1145O389CA
Output Functions
Copies
Non-Copied
Interleaves
OHP
1145O388CA
Copies
Non-Copied
Interleaves
OHP
Extra
Copies
1145O390CB
4-7