Table of Contents
Advertisement
4-8
1. Using the Applied Input
OHP Setting Procedure
Place the original on the Original Glass or in
1
the Duplexing Document Feeder.
Touch
.
OHP
2
Place the OHP transparencies on the Manual
3
Bypass Tray. The side and edge on which
white tape has been affixed, should be face
up and towards the bypass port.
Select the size of the OHP transparencies
4
loaded in the Manual Bypass Tray.
Output Functions
1154O008AA
1154P140CA
1144O014AA
1154P185DA
Touch
.
OK
5
Select the Tray in which the interleaves are
6
OK
loaded and touch
NOTES
• If you make copies from an original set, one
page after another, via the Original Glass,
make them in descending page order.
• If you want to use a Sorter or Staple Sorter for
the copy run, remove the copy (OHP
transparencies) as soon as it is fed into the bin.
If it is left in the bin for a while, it can curl.
• After making copies on the OHP
transparencies, peel off the white tape affixed
onto them.
Select whether you want to copy on the
7
interleaves (Yes) or not (No) at "Copy onto
Inserts."
.
1154P186DA
1154P242DA
Advertisement
Table of Contents
