Using The Duplexing Document Feeder - Minolta CF910 Manual

3-6
2. Placing Originals

Using the Duplexing Document Feeder

The Duplexing Document Feeder automatically feeds original sheets placed on the Document Feed Tray
one by one. After the copy cycle has been completed, it automatically ejects the original onto the
Document Exit Tray.
Some originals may not be suitable for reliable operation of the Duplexing Document Feeder. Here is a
guideline.
Originals Suitable for the Duplexing Document Feeder
Type of Originals: Sheets (Plain paper)
Normal mode
•1-Sided Original (weighing 50 g/m² to 110 g/m²)
•2-Sided Original (weighing 60 g/m² to 90 g/m²)
•Mixed Original Detection mode (weighing 60 g/m² to 90 g/m²)
Original Size: 1-Sided Original, 2-Sided Original Mode : A3L to A5L
2-in-1 (Dual Original Scanning) mode
Mixed Original Detection mode
Originals Not Suitable
• Typing paper, paraffin paper, and other thin paper
• Thick paper
• Originals greater than A3 or smaller than A5
• Transparencies, translucent paper
• Wrinkled, dog-eared, curled, or torn originals
• Clipped or stapled originals
• Carbon-backed originals
Typing paper, Typing paper,
paraffin paper, paraffin paper,
and other thin and other thin
paper paper
NOTE
For any of these types of originals, raise the Duplexing Document Feeder and place the original
manually on the Glass to make a copy.
Thick paper Thick paper
p. 3-3
: A4C
: A3L to A4
Continuous
forms
Wrinkled or
dog-eared
original
Stapled
originals
1134O073AA