When The Message "Load Paper In The Xxxx Tray." Appears; Paper Loading Procedures - Minolta CF910 Manual

6-2

1. When the Message "Load paper in the XXXX Tray." Appears

Paper Loading Procedures

Upper and Lower Trays
Slide the Tray out.
1
Load the paper stack into the Tray so that its
2
front side (the side facing up when the
package was unwrapped) faces down. Then,
slide the Tray back in.
NOTES
• Up to 500 sheets of paper(80g/m²) can be
loaded.
• The paper should be loaded no higher than the
(Max. Level Indicator).
When the Tray currently selected for use runs out of
paper, the message shown on the left appears. The
current copy cycle is interrupted and you cannot start
a new copy cycle. Load the tray with paper by using
the following procedure:
NOTE
Only the following type of paper can be loaded in
the tray. Use of paper recommended by us is
encouraged to keep a given level of copy quality
and prevent paper misfeed.
• Paper weight: 64g/m² to 105g/m²
1154P428CA
• Size: A3 lengthwise to A5 lengthwise
Thick paper (Heavy Stock 2) and OHP
transparencies cannot be loaded in the tray.
Middle Tray
Slide the Tray out.
1
Load the paper stack into the Tray so that its
2
front side (the side facing up when the
package was unwrapped) faces down. Then
slide the Tray back in.
1144O019AA
NOTES
• Up to 250 sheets of paper (80g/m²) can be
loaded.
• The paper should be loaded no higher than the
(Max. Level Indicator).
1144L54AA
1144O022AA
Max Level
1144L044AA