Table of Contents
Advertisement
Making Copies from A Book Using
Book Copy Mode
("Book" refers to an open bound original.)
Place the open book so that its top edge is at
1
the rear of the copier and the center of the
book is aligned with the Book Marker
indicated on the Original Length Scale.
Original Length Scale
Gently lower the Duplexing Document
2
Feeder or Original Cover.
NOTES
• If the book is thick, make a copy with the
Duplexing Document Feeder or Original
Cover raised.
• Do not look directly at the Original Glass
surface as a strong beam of light is emitted.
• Not positioning the open book properly will
result in copies with pages in incorrect order.
• Start copying with the higher-numbered pair.
When Copier is Equipped with a
Duplexing Document Feeder
Make sure of the correct placement of the original
in any of the following cases if the copier is
equipped with a Duplexing Document Feeder.
• Making copies in the Photo mode
• Making A3 Wide copies from an A3 original
1
1155O027AA
Book Marker
2
3
1154O003AA
Instructions for Original Placement
• Be sure to raise the Duplexing Document Feeder
15° or more before placing the original. If the
Duplexing Document Feeder is raised to an
angle less than 15°, the copier may fail to select
the correct copy paper size or zoom ratio.
• Do not place an original weighing more than 2
kg on the Glass.
• When placing an open book, do not press the
book hard on the Glass, as the Glass could crack.
Place the original, by aligning the rear edge
with the Length Scale and the left edge with
the
(Photo) mark.
Gently lower the Duplexing Document
Feeder or the Original Cover.
Make settings in the Photo Mode.
p. 3-33
3-5
2. Placing Originals
PHOTO Mark
1144Y002AA
15
1144O010AA
Advertisement
Table of Contents
