4
Setting up automatic print of broadcast report
Have the transmission report automatically printed after the broadcast
order has been finished in order to enable you to check whether the
broadcast order has been carried out successfully.
1
Press the [MENU] key eight times.
Confirm your choice by pressing the
[SET] key.
2
Press the [MENU] key twice.
Confirm your choice by pressing the
[SET] key.
Press the numerical keys [3] and [5]
3
for software switch-35 ON. Confirm
your entry by pressing the [SET]
key.
4
Select via the following numerical
keys as indicated below:
❍
00 (OFF)
❍
01 (ON)
5
Press the [SET] key.
The setting is stored.
6
Press the [STOP] key twice in order
to return to the standard display.
Software switches are handy!
The fax machine can be individually set by means of the software
switches. What possibilities of settings are available and how to
change the settings: see page 9-1.
4-24
8: FAX SET-UP ?
3: FEATURE SW. ?
( 3 5 ) B/O REPORT
ON
08 Sep. '99 15:32
MF 1400
Sending documents
( 0 1 )
Rev. 1.1.1/22.10.99