Sending documents
Permanently setting the transmission resolution
The resolution of the Minoltafax 1400 in standby mode can be set
via the software switches.
1
Press the [MENU] key 8 times.
Confirm your choice via the
[SET] key.
2
Press the [MENU] key twice.
Confirm your choice via the
[SET] key.
3
Press the numerical keys [2] and [7]
for software switch 27. Confirm your
choice via the [SET] key.
4
Enter the code as required via the
numerical keys:
❍
00 (Std. – for standard text)
❍
01 (Fine – for text and graphics with fine lines)
❍
02 (Super-fine – for text and graphics with extremely fine lines)
❍
03 (Gray scale – for photos and graphics with Gray scales)
❍
04 (Save last setting)
5
Press the [SET] key.
The setting is now stored.
6
Press the [STOP] key twice to
return to the standard display.
Saving the last setting!
When entering code 04 (last setting), the fax machine will not be
returned to standby mode. The last setting which was selected
via the [RESOLUTION] key will be retained.
Rev. 1.1.1/22.10.99
8: FAX SET-UP ?
3: FEATURE SW. ?
( 2 7 ) RESOLUTION
STD.
08 Sep. '99 15:32
MF 1400
4
( 0 0 )
4-5