Receiving faxes
Release of manual fax forwarding
How to manually forward received fax messages.
Please observe the following:
✔
The fax machine from which you release manual fax forwarding, has
to be set at inband signalling.
1
Dial the number of your Minoltafax 1400 on the fax machine to which
the transmission shall be forwarded.
2
Press the [*] key as soon as you hear the fax signal of your fax
machine.
Enter the password selected for the manual fax forwarding.
3
4
If the password is accepted by the Minoltafax 1400, the CNG signals
are released.
❍
If a wrong password is entered, the ERROR signal (4) is to be
heard, followed by the PASSWORD INPUT signal (3). Should you
enter a wrong password three times after another, the connection
will be interrupted.
❍
If there is no fax transmission to be forwarded, the END signal (2)
is to be heard and the connection is interrupted.
❍
If there are fax transmissions for forwarding, the RELEASE signal
(1) is to be heard and forwarding begins.
(1)
(2)
(3)
(4)
Rev. 1.1.1/22.10.99
MF 1400
5
5-7