Using The Status Monitor; Installing Status Monitor - Ricoh BP20N User Manual

Using the Status Monitor

If an error occurs while printing, the Status Monitor window
appears, showing the error.
N s:
OTE
• The Status Monitor program can only be used if you connect the
printer to your computer with the USB cable, or on the network.
• You can use the Status Monitor in Windows 98/Me/NT 4.0/2000/XP.

Installing Status Monitor

1
Insert the supplied CD-ROM into your CD-ROM drive.
The CD-ROM should automatically run and an maintenance
window appears.
If the maintenance window does not appear, click Start and
then Run. Type X:\Setup.exe, replacing "X" with the
letter of your drive and click OK.
2
.
Click Next
3
Select Custom installation. Click Next.
4
Select your printer and click Next.
N s
: If your printer is not already connected to the computer, the
OTE
following window will appear.
• After connecting the printer, click Next.
• If you don't want to connect the printer at this time, click Next,
and No on the following screen. Then the installation will start
and a test page will not be printed at the end of the installation.
5
Click Status Monitor and then click Next.
P T 4.29
RINTING ASKS
4