Using Security - Ricoh BP20N User Manual

Using Security

Use these instructions to change the admin user's name and password.
To make general maintenance settings, perform these steps:
Enable Web Image Monitor (see "Enabling Internet Services" on page 5-4).
1
At the Web Image Monitor Home Page for the DSm520pf/AC122/AC205, select the
2
[Maintenance] tab.
In the Maintenance frame, select [Security].
3
Select the checkbox to enable Security for using security.
4
To change the Admin User Password, in the Change Admin User Name and Password
5
area:
Enter the [New User Name] and [Old User Name].
Enter the [New User Password] and [Old User Password].
Click the [Apply] button to implement any changes.
6
NOTE: Click the [Undo] button to cancel any changes made and return to the
previous values.
Page 5-8 System Administration Guide