Ricoh BP20N User Manual page 210

SNMP
Use these instructions to configure the Simple Network Management Protocol (SNMP) using
Web Image Monitor DSm520pf/AC122/AC205.
Configure SNMP
To configure SNMP, perform these steps:
Enable Web Image Monitor (see "Enabling Internet Services" on page 3-5).
1
At the Web Image Monitor Home Page for the DSm520pf/AC122/AC205, select
2
the [Network Settings] tab.
Select [SNMP] and check the Protocol Configuration details are correct. If any of the
3
details are incorrect then enter the correct information.
Click the [Apply] button to implement any changes.
4
NOTE: Click the [Undo] button to cancel any changes made and return to the
previous values.
SNMP Traps
Enable Authentication
Traps:
Enable Address Pair 1 to
5
IP Address 1 to 5
Community Name 1 to 5
Page 3-10
Parameter Name Description
Enable or disable the
authentication traps.
Enable/Disable the IP Address
and community name.
the IP Address of the host to
which the SNMP Traps should be
directed.
The community name to which
the host belongs.
Maximun
Default
Length
ON
OFF
0.0.0.0
NULL 14
System Administration Guide