Ricoh BP20N User Manual page 47

2.28
S U Y
ETTING P
6
Select the components to be installed and click
selecting the components, the following window appears. You can
also change the printer name, set the printer to be shared on the
network, set the printer as the default printer, and change the port
name of each printer. Click
To install this software on a server, select the
printer on a server
7
After the installation is finished, a window appears asking
you to print a test page.
Otherwise, just click Finish.
N
: After setup is complete, if your printer driver doesn't work
OTE
properly, reinstall the printer driver. See "Reinstalling Printer Software"
on page 2.29.
P
OUR RINTER
Next
.
checkbox.
Next
. After
Setting up this