Ricoh BP20N User Manual page 207

Ethernet
Use these instructions to set the speed rate for Ethernet using Web Image Monitor:
To complete the installation of the DSm520pf/AC122/AC205, perform these steps:
Enable Web Image Monitor (see "Enabling Internet Services" on page 3-5).
1
At the Web Image Monitor Home Page for the DSm520pf/AC122/AC205, select
2
the [Network Settings] tab.
In the Network Settings, select [General].
3
Choose the appropriate [Speed Rate].
4
Click the [Apply] button to implement any changes.
5
NOTE: Click the [Undo] button to cancel any changes made and return to the
previous values.
System Administration Guide Page 3-7