Ricoh BP20N User Manual page 209

Check the DNS Settings details and if necessary enter the correct information required.
4
Click the [Apply] button to implement any changes.
5
NOTE: Click the [Undo] button to cancel any changes made and return to the
previous values.
Test Print
To ensure the device has been installed on the network correctly a test print should be
submitted from a client workstation. Perform the following steps:
Open a document on a client workstation.
1
Select the device as the printer to which the selected document will be sent.
2
Print the document on the device and verify that it prints correctly.
3
Ensure the driver is installed on every workstation that will be sending jobs to the device.
4
Repeat the test for all workstations that will be sending jobs to the device.
5
The installation process is now complete.
6
System Administration Guide Page 3-9