Windows 2000 (Internet Printing Protocol) - Ricoh BP20N User Manual

Windows 2000 (Internet Printing Protocol)

NOTE: Windows 2000 supports printing via IPP as standard when TCP/IP is
installed on a Windows 2000 Workstation.
Use the Add Printer Wizard to add the DSm520pf/AC122/AC205 or BP20N to the network.
Select [Start], select [Settings], and then select [Printers].
1
Double-click on the [Add Printer] icon to display the Add Printer Wizard.
Verify that the [Network Printer] is selected and click [Next].
2
The [Locate Your Printer] screen will be displayed.
Select [Connect to a printer on the Internet or on your intranet].
3
In the [URL] field enter the IP address or hostname of the printer in the following format:
"http://aaa.bbb.ccc.ddd" or "http://printer-host-name", where "aaa.bbb.ccc.ddd" is the IP
address of the DSm520pf/AC122/AC205 and "printer-host-name" is the host name of the
The Add Printer Wizard will then ask if you wish to install a local driver for this printer. You
should click [OK] to install the driver.
Insert the CD ROM with the DSm520pf/AC122/AC205 or BP20N drivers into the workstation
4
and select [Have Disk].
Browse to the required Windows 2000 driver on the CDROM and select [OK].
NOTE: The driver will be found in the Drivers>Print folder on the CD in the
appropriate PCL folder. The driver is identified by the file extension .inf.
Select [Next], and select [Next] again and the DSm520pf/AC122/AC205 or BP20N driver
will be loaded onto the workstation.
A
Select [Finish] to accept the Yes choice.
Continue with Test Print on page 2-13.
5
Page 2-12
DSm520pf/AC122/AC205 or BP20N registered with a DNS server.
dialog box will be displayed with a message regarding the printing of a test page.
System Administration Guide