Installing Software For Network Printing - Ricoh BP20N User Manual

2.24
S U Y
ETTING P

Installing Software for Network Printing

When you connect your printer to a network, you must first configure
the TCP/IP settings for the printer. After you have assigned and verified
the TCP/IP settings, you are ready to install the software on each
computer on the network.
You can install the printer software using the typical or custom method.
Typical Installation
This is recommended for most users. All components necessary for
printer operations will be installed.
1
Make sure that the printer is connected to your network and
powered on. For details about connecting to the network, see the
System Administration Guide.
2
Insert the supplied CD-ROM into your CD-ROM drive.
The CD-ROM should automatically run, and an installation window
appears.
If the installation window does not appear, click
Run
. Type X:\
represents your drive and click
3
Next
Click .
• If necessary, select a language from the drop-down list.
View User's Guide
•
System Administration Guide. If your computer doesn't have
Adobe Acrobat, click on this option and it will automatically
install Adobe Acrobat Reader for you.
P
OUR RINTER
Setup.exe
, replacing "X" with the letter which
OK
.
: Allows you to view the User's Guide and
Start
and then