Table 34 Advanced > Wi-Fi Configuration > General - ZyXEL Communications MAX-306 User Manual

Chapter 8 The Wi-Fi Configuration Screens
The following table describes the Security Mode options for both WPA-PSK and
WPA2-PSK.
Table 34 ADVANCED > Wi-Fi Configuration > General
LABEL
Security Mode
WPA Compatible
Pre-Shared Key
ReAuthentication
Time
Idle Timeout
Group Key
Update Timer
108
DESCRIPTION
Select WPA-PSK or WPA2-PSK to display the following Wi-Fi
network security options.
Select this option to ensure backwards compatibility with the WPA-
PSK encryption protocol while in WPA2-PSK mode, thus allowing
both WPA and WPA2 clients to connect simultaneously.
Note: This option does not appear in WPA-PSK mode. It only
appears in WPA2-PSK mode.
Enter the password that wireless clients will have to match in order
to make a secure Wi-Fi network connection with this device.
Set the time (in seconds) that the WiMAX Device waits before
requiring a connected client to reauthenticate their session.
Set the time (in seconds) the WiMAX Device waits before
disconnecting an idle client. If a client becomes active before the
idle count is up, the count resets.
Set the time (in seconds) that WiMAX Device updates the encryption
key used for all connected clients on the wireless network.
User's Guide