Advanced Analog Phone Setup; Figure 78 Voice > Phone > Analog Phone > Advanced; Table 62 Voice > Phone > Analog Phone > Advanced - ZyXEL Communications MAX-306 User Manual

Chapter 13 The Phone Screens

13.2.1 Advanced Analog Phone Setup

Click the Advanced button in VOICE > Phone > Analog Phone to edit
advanced settings for each phone port.
Figure 78 VOICE > Phone > Analog Phone > Advanced
The following table describes the labels in this screen.
Table 62 VOICE > Phone > Analog Phone > Advanced
LABEL
Voice Volume Control
Speaking
Volume
Listening
Volume
Echo Cancellation
G.168 Active
Dialing Interval Select
Dialing Interval
Select
VAD Support
168
DESCRIPTION
Enter the loudness that the WiMAX Device uses for speech that it sends
to the peer device. -1 is the quietest, and 1 is the loudest.
Enter the loudness that the WiMAX Device uses for speech that it
receives from the peer device. -1 is the quietest, and 1 is the loudest.
Select this if you want to eliminate the echo caused by the sound of
your voice reverberating in the telephone receiver while you talk.
Enter the number of seconds the WiMAX Device should wait after you
stop dialing numbers before it makes the phone call. The value depends
on how quickly you dial phone numbers.
If you select Active Immediate Dial in VOICE > Phone > Common,
you can press the pound key (#) to tell the WiMAX Device to make the
phone call immediately, regardless of this setting.
Select this if the WiMAX Device should stop transmitting when you are
not speaking. This reduces the bandwidth the WiMAX Device uses.
Note: The G.711 codec does not support this feature.
User's Guide