ZyXEL Communications MAX-306 User Manual page 80

Chapter 6 The LAN Configuration Screens
Table 21 ADVANCED > LAN Configuration> IP Alias (continued)
LABEL
RIP Version
IP Alias 2
IP Address
IP Subnet
Mask
RIP
Direction
RIP Version
Apply
Reset
80
DESCRIPTION
Select which version of RIP the WiMAX Device uses when it sends or
receives information on the subnet.
• RIP-1 - The WiMAX Device uses RIPv1 to exchange routing
information.
• RIP-2B - The WiMAX Device broadcasts RIPv2 to exchange routing
information.
• RIP-2M - The WiMAX Device multicasts RIPv2 to exchange routing
information.
Select this to add the specified subnet to the LAN port.
Enter the IP address of the WiMAX Device on the subnet.
Enter the subnet mask of the subnet.
Use this field to control how much routing information the WiMAX
Device sends and receives on the subnet.
• None - The WiMAX Device does not send or receive routing
information on the subnet.
• Both - The WiMAX Device sends and receives routing information on
the subnet.
• In Only - The WiMAX Device only receives routing information on
the subnet.
• Out Only - The WiMAX Device only sends routing information on the
subnet.
Select which version of RIP the WiMAX Device uses when it sends or
receives information on the subnet.
• RIP-1 - The WiMAX Device uses RIPv1 to exchange routing
information.
• RIP-2B - The WiMAX Device broadcasts RIPv2 to exchange routing
information.
• RIP-2M - The WiMAX Device multicasts RIPv2 to exchange routing
information.
Click to save your changes.
Click to restore your previously saved settings.
User's Guide