Figure 139 Windows Vista: Internet Protocol Version 4 (Tcp/Ipv4) Properties - ZyXEL Communications MAX-306 User Manual

Appendix B Setting Up Your Computer's IP Address
The Internet Protocol Version 4 (TCP/IPv4) Properties window opens.
7

Figure 139 Windows Vista: Internet Protocol Version 4 (TCP/IPv4) Properties

Select Obtain an IP address automatically if your network administrator or ISP
8
assigns your IP address dynamically.
Select Use the following IP Address and fill in the IP address, Subnet mask,
and Default gateway fields if you have a static IP address that was assigned to
you by your network administrator or ISP. You may also have to enter a
Preferred DNS server and an Alternate DNS server, if that information was
provided.Click Advanced.
Click OK to close the Internet Protocol (TCP/IP) Properties window.
9
Click OK to close the Local Area Connection Properties window.
Click Start > All Programs > Accessories > Command Prompt.
1
In the Command Prompt window, type "ipconfig" and then press [ENTER].
2
You can also go to Start > Control Panel > Network Connections, right-click a
network connection, click Status and then click the Support tab to view your IP
address and connection information.
290
Verifying Settings
User's Guide