Mac Filter; Figure 44 Advanced > Wan Configuration >Wimax Configuration; Table 35 Advanced > Wan Configuration >Wimax Configuration - ZyXEL Communications MAX-306 User Manual

8.3 MAC Filter

Click ADVANCED > Wi-Fi Configuration > MAC Filter. This screen allows you
to create a list of MAC addresses that you will allow or deny on your network.
Note: If you do not want to enable this feature, enter 00:00:00:00:00:00 in the MAC
address fields. (This is the default setting.)
Figure 44 ADVANCED > WAN Configuration >WiMAX Configuration
The following table describes the labels in this screen.
Table 35 ADVANCED > WAN Configuration >WiMAX Configuration
LABEL
Active
Filter Action
Set
MAC Address
Apply
Reset
User's Guide
DESCRIPTION
Select this option to enable MAC address filtering on your WiMAX
Device. When active, only clients whose MAC addresses match those
you enter on this list are filtered.
Select the the type of filter you want to employ:
• Allow - Select this option to allow connections only to the MAC
addresses on the list.
• Deny - Select this option to disallow connection only to the MAC
addresses on this list.
The number of the item in the list.
Enter the MAC address to filter. MAC addresses are always written as
8 hexidecimal pairs separated by colons.
Click to save your changes.
Click to restore your previously saved settings.
Chapter 8 The Wi-Fi Configuration Screens
109