Wi-Fi Settings; Wps - ZyXEL Communications NR2301 User Manual

1.5.5 Wi-Fi Settings

To enable the WiFi clients (up to 32) to connect to the 2.4GHz / 5GHz WiFi band, press the down button
to go to Wi-Fi Settings and press the Select button to select it. The following screen displays.
Figure 8 Wi-Fi Settings Screen
The following table describes the labels in this screen.
Table 5 Wi-Fi Settings Screen
LABEL
2.4GHz Wi-Fi
5GHz Wi-Fi
2.4G+5GHz Wi-Fi
Combine Wi-Fi
Apply
Back

1.5.6 WPS

Your NR2301 supports WiFi Protected Setup (WPS), which is an easy way to set up a secure WiFi network.
WPS is an industry standard specification, defined by the WiFi Alliance.
WPS allows you to quickly set up a WiFi network with security, without having to configure security
settings manually. Each WPS connection works between two devices. Both devices must support WPS
(check each device's documentation to make sure). When WPS is activated on a device, it has two
minutes to find another device that also has WPS activated. Then, the two devices connect and set up
a secure network by themselves.
You can use the LCD of the NR2301 to activate WPS in order to quickly set up a WiFi network with
security.
In the LCD Menu screen, press the down button to go to WPS and press the Select button to select it. The
following screen displays.
Chapter 1 Get to Know Your NR2301
DESCRIPTION
Select 2.4GHz Wi-Fi to enable the 2.4GHz WiFi band.
Select 5GHz Wi-Fi to enable the 5GHz WiFi band.
Select 2.4G+5GHz Wi-Fi to enable both the 2.4GHz and 5GHz WiFi bands.
Select Combine Wi-Fi to have the 2.4GHz and 5GHz use the same SSID.
Click Apply to save your changes back to the NR2301.
Select this button to return to the Menu list.
NR2301 User's Guide
17