ZyXEL Communications MAX-306 User Manual page 232

Chapter 19 The Logs Screens
Table 94 TOOLS > Logs > Log Settings
LABEL
Send Log to
Send Alerts to
Log Schedule
Day for Sending
Log
Time for
Sending Log
Clear log after
sending mail
Syslog Logging
Active
Syslog Server
IP Address
Log Facility
Active Log and Alert
Log
Send
immediate alert
Apply
Cancel
232
DESCRIPTION
Enter the e-mail address to which log entries are sent by e-mail. Leave
this field blank if you do not want to send logs by e-mail.
Enter the e-mail address to which alerts are sent by e-mail. Leave this
field blank if you do not want to send alerts by e-mail.
Select the frequency with which the WiMAX Device should send log
messages by e-mail.
• Daily
• Weekly
• Hourly
• When Log is Full
• None.
If the Weekly or the Daily option is selected, specify a time of day
when the E-mail should be sent. If the Weekly option is selected, then
also specify which day of the week the E-mail should be sent. If the
When Log is Full option is selected, an alert is sent when the log fills
up. If you select None, no log messages are sent.
This field is only available when you select Weekly in the Log
Schedule field.
Select which day of the week to send the logs.
This field is only available when you select Daily or Weekly in the Log
Schedule field.
Enter the time of day in 24-hour format (for example 23:00 equals
11:00 pm) to send the logs.
Select this to clear all logs and alert messages after logs are sent by e-
mail.
Select this to enable syslog logging.
Enter the server name or IP address of the syslog server that logs the
selected categories of logs.
Select a location. The log facility allows you to log the messages in
different files in the syslog server. See the documentation of your
syslog for more details.
Select the categories of logs that you want to record.
Select the categories of alerts that you want the WiMAX Device to send
immediately.
Click to save your changes.
Click to return to the previous screen without saving your changes.
User's Guide