Table 6 Main - ZyXEL Communications MAX-306 User Manual

Chapter 2 Introducing the Web Configurator
Table 5 Main > Icons (continued)
ICON
The following table describes the labels in this screen.

Table 6 Main

LABEL
Help
Wizard
Logout
WiMAX Connection
Status
Software Version
Version Date
System Uptime
44
DESCRIPTION
STATUS
Click to go to the Status screen, where you can view status and
statistical information for all connections and interfaces.
Strength Indicator
Displays a visual representation of the quality of your WiMAX
connection.
• Disconnected - Zero bars
• Poor reception - One bar
• Good reception - Two bars
• Excellent reception - Three bars
DESCRIPTION
Click to open the web configurator's online help.
Click to run the Internet Connection and VoIP Connection Setup
Wizard. All of the settings that you can configure in this wizard
are also available in these web configurator screens.
Click to log out of the web configurator.
Note: This does not log you off the WiMAX network, it simply
logs you out of the WiMAX Device's browser-based
configuration interface.
This field indicates the current status of your WiMAX connection.
Status messages are as follows:
• Connected - Indicates that the WiMAX Device is connected
to the WiMAX network. Use the Strength Indicator icon to
determine the quality of your network connection.
• Disconnected - Indicates that the WiMAX Device is not
connected to the WiMAX network.
• DL_SYN - Indicates a download synchronization is in
progress. This means the firmware is checking with the
server for any updates or settings alterations.
This field indicates the version number of the WiMAX Device's
firmware. The version number takes the form of: Version(Build),
release status (candidate) | Version Release Date.
For example: V3.60(BCC.0)c4 | 07/08/2009 indicates that the
firmware is 3.60, build BCC.0, candidate 4, released on July 08,
2009.
This field indicates the exact date and time the current firmware
was compiled.
This field indicates how long the WiMAX Device has been on.
This resets every time you shut the device down or restart it.
User's Guide