Europe Type Supplementary Phone Services; Table 65 European Type Flash Key Commands - ZyXEL Communications MAX-306 User Manual

You can invoke all the supplementary services by using the flash key.

13.5.2 Europe Type Supplementary Phone Services

This section describes how to use supplementary phone services with the Europe
Type Call Service Mode. Commands for supplementary services are listed in the
table below.
After pressing the flash key, if you do not issue the sub-command before the
default sub-command timeout (2 seconds) expires or issue an invalid sub-
command, the current operation will be aborted.

Table 65 European Type Flash Key Commands

COMMAND
Flash
Flash
Flash
Flash
Flash
Flash
European Call Hold allows you to put a call (A) on hold by pressing the flash key.
If you have another call, press the flash key and then "2" to switch back and forth
between caller A and B by putting either one on hold.
Press the flash key and then "0" to disconnect the call presently on hold and keep
the current call on line.
Press the flash key and then "1" to disconnect the current call and resume the call
on hold.
If you hang up the phone but a caller is still on hold, there will be a remind ring.
European Call Waiting allows you to place a call on hold while you answer another
incoming call on the same telephone (directory) number.
If there is a second call to a telephone number, you will hear a call waiting tone.
Take one of the following actions.
User's Guide
SUB-
DESCRIPTION
COMMAND
Put a current call on hold to place a second call.
Switch back to the call (if there is no second call).
0 Drop the call presently on hold or reject an incoming call
which is waiting for answer.
1 Disconnect the current phone connection and answer the
incoming call or resume with caller presently on hold.
2 1. Switch back and forth between two calls.
2. Put a current call on hold to answer an incoming call.
3. Separate the current three-way conference call into
two individual calls (one is on-line, the other is on hold).
3 Create three-way conference connection.
*98# Transfer the call to another phone.
Chapter 13 The Phone Screens
171