Table of Contents
Advertisement
The following table describes the Security Mode options for both WPA and WPA2.
Table 33 ADVANCED > Wi-Fi Configuration > General
LABEL
Security Mode
WPA Compatible
ReAuthentication
Time
Idle Timeout
Group Key
Update Timer
Authentication
Server
IP Address
Port Number
Shared
Secret
Accounting
Server
Active
IP Address
Port Number
Shared
Secret
Figure 43 ADVANCED > Wi-Fi Configuration > WPA-PSK/WPA2-PSK Optionsl
User's Guide
DESCRIPTION
Select WPA or WPA2 to display the following Wi-Fi network security
options.
Select this option to ensure backwards compatibility with the WPA
encryption protocol while in WPA2 mode, thus allowing both WPA
and WPA2 clients to connect simultaneously.
Note: This option does not appear in WPA mode. It only
appears in WPA2 mode.
Set the time (in seconds) that the WiMAX Device waits before
requiring a connected client to reauthenticate their session.
Set the time (in seconds) the WiMAX Device waits before
disconnecting an idle client. If a client becomes active before the
idle count is up, the count resets.
Set the time (in seconds) that WiMAX Device updates the encryption
key used for all connected clients on the Wi-Fi network.
This is a server used to securely check one's login credentials, such
as a RADIUS server.
Enter the IP address of the authentication server.
Enter the port number of the authentication server.
Enter the password for the authentication server.
This is a server that measures the duration of all active connections,
usually for accounting purposes, such as an ISP that charges users
per minute online rather than a flat fee per month.
Select this option to have the WiMAX Device use an accounting
server in tandem with the authentication server.
Enter the IP address of the accounting server.
Enter the port number of the accounting server.
Enter the password for the accounting server.
Chapter 8 The Wi-Fi Configuration Screens
107
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
