Chapter 9 The VPN Transport Screens
9.2 General
Click ADVANCED > VPN Transport to turn VPN transport on or off and to set the
VPN transport endpoint (your service provider's router).
Figure 48 ADVANCED > VPN Transport > General
The following table describes the labels in this screen.
Table 37 ADVANCED > VPN Transport > General
LABEL
L2/L3 VPN Transport General Setup
Transport L2/L3
VPN...
Remote GRE
Tunnel End
Apply
Reset
9.3 Customer Interface
Customer interfaces connect data coming from your computers to Ethernet
pseudowires, according to the data's VLAN (Virtual Local Area Network)
information. One customer interface is for traffic that has no tag; this is the
default interface (rule 0) which cannot be deleted in the GUI. All other customer
interfaces are identified by their VLAN ID.
Once the WiMAX Device has examined a frame's VLAN tag, it is able to assign the
frame to a specified path. This is done using a customer interface. The customer
116
DESCRIPTION
Select this to turn the VPN transport feature on. Deselect it to turn the
VPN transport feature off.
Enter the domain name or IP address of your service provider's router.
Click to save your changes.
Click to restore your previously saved settings.
User's Guide