Notices; Fcc Information - Xblue Networks X16 User Manual

X16 User Guide
• Each message is automatically saved after it has been played. To scroll
through saved messages, use the left and/or right navigation keys.
Notes:
1) Messages will play in order that they are received.
2) While a message is playing, us the up or down navigation key to scroll
through Pause, Volume, and Exit. Press the select navigation button
select, the desired action.
3) While a message is playing and the left navigation key is pressed, the
previous message will be played, or if it is the first message, the
message will be repeated.
4) While a message is playing and the right navigation key is pressed, the
next message will be played. However, if it is the last message in the
list, a prompt will be played, "End all Messages".
Deleting Messages
After listening to a message, it will automatically be saved in the voice mailbox.
To delete the message, press the "Delete" button twice or the "Delete" button
and the center Navigation Key while the message is playing. The voice mail
message will be deleted and the next message will automatically begin to play.
Note:
The message is permanently deleted and cannot be recovered. If an extension is
unplugged for more than 120 seconds, all of voice mail messages for that
extension will be deleted.
Voice mailbox Quick Start Guide
Although each voice mailbox comes with a prerecorded outgoing message,
recording a new outgoing message is a nice way to personalize the way the
mailbox answers incoming calls.
Getting Started:
With your handset on hook...Personal Outgoing Messages are accessed in the
voice mailbox area under the "Phone Programming" Parameter.
Press the "Programming" button to enter the programming mode, and then
Press the center navigation button to access the Phone Setup area.
AUTO MUTE
Phone Setup
System Setup
- 46 -

Notices

Hearing Aid Compatibility:
The digital telephone endpoints are hearing aid compatible, as defined in section
68.316 of Part 68 FCC Rules and Regulations.
UL/CSA Safety Compliance:
The X16 system has met all safety requires, and found to be in compliance with
the Underwriters Laboratories (UL) 1459.
Warning: This service information is designed for experienced repair technicians
only and is not designed for use by the general public. It does not contain
warnings or cautions to advise non-technical individuals of potential dangers in
attempting to service a product. Products powered by electricity should be
serviced or repaired only by experienced professional technicians. Any attempt to
service or repair the product or products dealt with in this service information by
anyone else could result in serious injury or death.
This equipment generates, uses, and can radiate radio frequency energy, and
if not installed and used properly, that is, in strict accordance with the
instruction manual, may cause interference to radio and television reception.
This equipment has been tested and found to comply with the limits for a
Class B computing device in Subject J of Part 15 of FCC Rules, which are
designed to provide reasonable protection against such interference.
However, there is no guarantee, or warranty, that interference will not occur
in a particular installation. If this equipment causes interference or fails to
operate correctly, due to radio frequency interference (RFI) or
electromagnetic interference (EMI), it will be fixed at the owners' expense.

FCC Information

Provide the Telephone Company with the following FCC information:
Item
FCC Registration
Ringer Equivalence
Networks Address Signaling
Required Network Interface
Specification
D6XKH05BX16
0.5B
E
RJ11 & RJ14
7 -
-