Receiving Caller Id - Xblue Networks X16 User Manual

X16 User Guide
1-831-601-7283
Dial Alternate
Press the select button again to dial the displayed number.
5.
Press the navigation scroll up or scroll down key to start the copy to
6.
the phone book.
1-831-601-7283
Cpy To Phonebook
Press the select button, to store the displayed name and telephone
7.
number into the phone book. Names such as "out of area",
"Private", "unknown" will not be stored.

Receiving Caller ID

1) If two lines ring simultaneously, the Caller ID of the first call into the
system will be displayed.
2) The system is equipped with Type 2, Call waiting Caller ID.
a. If the CO Line has call waiting caller ID, and a second call is
received on an answered CO line, a "Beep Tone" will be
heard, and the CID of the second call will be displayed.
3) While on a CO Line call, press the Left or Right navigation key to
display the CID of another ringing CO line. The number "Lx"
where x = the CO Line number will be displayed on the upper
right side of the display.
AUTO MUTE
913-599-2583L1
XBLUE Networks
- 18 -
Hold
Extension users may place telephone company central office line calls on hold
allowing them to be picked up at other extensions.
Hot Dial Pad
Hot dial pad allows extension users to dial numbers without lifting the handset or
pressing the speaker button.
Intercom Calling
Each extension is assigned a unique three digit code (number) ranging from 301
to 399. The number used as the time of registration becomes that extension's
intercom number. Dial the three digit code to intercom another extension.
DSS/BLF buttons allows for one touch intercom calling.
Intercom Paging
Intercom paging is similar to intercom calling, but when the call is connected, the
called party's mute button is active. This allows the called party to have private
conversations without being overheard.
Line Status Detection (Line in Use)
From Idle to Busy – The system will detect if another device is using one of the
telephone Lines and will automatically identify the line as busy.
From Busy to Idle – The system will detect when the line is no longer busy, and
automatically identify the line as idle.
Not Connected – If a telephone line is not connected to the system, it will be
automatically disabled, and no one will be able to connect to the line. A beep
tone is heard if a disabled telephone Line is pressed.
Non-system phone picking up the call
system phone, the system will, after 2 seconds, light the line button and see that
line as busy. When the call is disconnected, the line will be returned to idle.
Memo Recording - Voice Mail (standard)
The voice mail is equipped to record a memo, or a meeting in an office, by
pressing the preprogrammed Record button. When finished, press the speaker
button or replace the handset to hang up. The memo is then placed into the
user's mailbox. In addition, a remote user may also record a memo after they
are in their mailbox. A memo should not exceed 35 minutes in length.
– When the call is picked up by a non-
-
35 -