Xblue Networks X16 User Manual page 25

X16 User Guide
Programming Steps
Step 1 – Press the programming button
Step 2 – Select phone setup
Step 3 – Press the select (center) navigation key
Step 4 – Press the down navigation key and select "Feature Key"
Step 5 – Press the center navigation button to begin
Step 6 – Press the up or down navigation key to select the feature
button to be programmed or press the feature key to be
programmed.
AUTO MUTE
Select FTR Key
The display will show the selected FTR button. The display below shows
FTR#01, FTR button 1, was pressed.
AUTO MUTE
FTR#01:DSS/BLF
=301
Step 7 – Press the Program button to exit programming, and not modify
the current button programming or press the center button to change
the current setting.
AUTO MUTE
FTR#01
=DSS/BLF Key
Step 8 – Using the up or down navigation keys, select between DSS/BLF,
Speed Key, or Feature.
Step 9 – Press the select button to display the current programmed
function.
Step 10 – Enter the appropriate extension, speed dial number or use the
up or down navigation keys and select the desired feature.
Step 11 – Press the select button to confirm the selection.
- 28 -
Forward Destination – Extension users may
AUTO MUTE
FWD Destination
select from three destinations; Off, Voice
Mail, External Call and Trunk2Trunk.
Off – Calls will not forward
Voice Mail – Calls will be forwarded to the
AUTO MUTE
FWD Destination
users' personal mailbox. The center
=Off
navigation button will be lit solid.
External – The system will transfer an
incoming caller, using a second CO Line, to
an external destination.
Note:
External Call forward uses two CO Lines,
and you may experience a volume loss when
analog lines are connected using this feature. Also,
toll charges may apply. If all CO Lines are busy, the
call will not forward.
TRK2TRK – Allows calls to be transferred to
an external destination using the telephone
networks facilities. This may require special
features from the network provider.
Phone Number- Enter the telephone number
to be dialed when the External or TRK2TRK
AUTO MUTE
FWD PhoneNumber
forward timer expires. This can be any
=(Empty)
external telephone number such as a cellular
or home telephone number.
Each extension can set up their own voice
mail parameters.
AUTO MUTE
VoiceMail Setup
Remote Code – The remote code is the code
that an extension user will dial to access
AUTO MUTE
Remote Code
voice mail from a remote location.
25 -
-