Marking Multiple Items Of Data; Deleting An Exported File; Renaming An Exported File; Backing Up User Data - Roland INTEGRA-7 Owners & Installation Manual

Convenient Functions

Marking Multiple Items of Data

You can select multiple consecutive items of sound data, and set or
clear their marks in a single operation.
1.
In the screen where you're selecting sound data, select
the lowest-numbered item of sound data that you want
to select.
2.
Hold down the [SHIFT] button and use the cursor
[ ] [ ] buttons to select the highest-numbered item of
sound data that you want to select.
All sounds between the numbers you selected in steps 1 and 2 will
be selected.
The number of currently selected data items is shown in the upper
right of the screen.
3.
Press the [INC] button.
Pressing the [DEC] button will clear the mark from the sound data.

Deleting an Exported File

In the screen where you select the data file to be imported, you can
delete data files.
1.
In the UTILITY screen, choose "IMPORT" and press the
[ENTER] button.
The IMPORT screen will appear.
2.
Select the data file that you want to delete.
NOTE
Data that you delete cannot be recovered.
Take care not to inadvertently delete important data.
3.
Press the [MENU] button.
4.
Choose "DELETE" and press the [ENTER] button.
A message will ask "Are you sure?"
5.
Choose "OK" and press the [ENTER] button.

Renaming an Exported File

In the screen where you select the data file to be imported, you can
rename the data file.
1.
In the UTILITY screen, choose "IMPORT" and press the
[ENTER] button.
The IMPORT screen will appear.
2.
Select the data file that you want to rename.
3.
Press the [MENU] button.
4.
Choose "RENAME" and press the [ENTER] button.
For details on assigning a name, refer to "Assigning a Name" (p. 29).
5.
Press the [ENTER] button.
52

Backing Up User Data

You can back up all of settings in the INTEGRA-7 to a USB flash drive
(sold separately), or restore those settings into the INTEGRA-7's
memory.
* Connect your USB flash drive to the USB MEMORY port before
you back up or restore data.
NOTE
• If you execute the backup operation using a file name that
already exists, the backup data currently saved on the USB flash
drive will be overwritten. If you want to keep multiple backup
files within a single USB flash drive, you can either back them
up with different file names, or back them up as described in
"Backing Up USB Flash Drive Data to a Computer" (p. 53).
• Never insert or remove a USB flash drive while this unit is on.
Doing so may corrupt the unit's data or the data on the USB
flash drive.
• Carefully insert the USB flash drive all the way in-until it is firmly
in place.
• Use USB flash drive available from Roland. Proper operation
cannot be guaranteed if other USB device is used.
Backing Up to a USB Flash Drive
(BACKUP)
1.
In the UTILITY screen, choose "BACKUP" and press the
[ENTER] button.
2.
Assign a name to the backup file.
For details on assigning a name, refer to "Assigning a Name" (p. 29).
3.
Press the [ENTER] button.
A message will ask "Are you sure?"
4.
To execute, choose "OK" and press the [ENTER] button.
NOTE
Never turn off the unit while the backup operation is in progress.