Editing The Effects Of A Studio Set (Effects Routing Screen); Editing The Chorus Settings; Editing The Reverb Settings; Adjusting The Overall Tone Of The Audio Output (Master Eq) - Roland INTEGRA-7 Owners & Installation Manual

Editing a Studio Set
Editing the Effects of a Studio Set
(EFFECTS ROUTING Screen)
Here's how to edit a studio set's effects.
1.
In the top screen, press the [EFFECTS] button.
The EFFECTS ROUTING screen will appear.
When Motional Surround is "off"
When Motional Surround is "on"
2.
Move the cursor to the effect that you want to edit, and
press the [ENTER] button.
3.
Use the cursor buttons to select the setting you want to
edit, and use the value dial to edit its value.

Editing the CHORUS Settings

To edit Chorus settings, access the Chorus parameter screen.
* Chorus will not be available when Motional Surround is on.
1.
Access the EFFECTS SWITCH screen or the EFFECTS
ROUTING screen when the Motional Surround function is
"OFF," move the cursor to "CHORUS," and press the [ENTER]
button.
2.
Use the cursor buttons to select the setting you want to
edit, and use the value dial to edit its value.
36

Editing the REVERB Settings

To edit Reverb settings, access the Reverb parameter screen.
* Reverb will not be available when Motional Surround is on.
1.
Access the EFFECTS SWITCH screen or the EFFECTS
ROUTING screen when the Motional Surround function is
"OFF," move the cursor to "REVERB," and press the [ENTER]
button.
2.
Use the cursor buttons to select the setting that you want
to edit, and use the value dial to edit its value.
Adjusting the Overall Tone of the
Audio Output (MASTER EQ)
Here's how to make final adjustments to the overall tone of
INTEGRA-7's audio output (OUTPUT A (MIX) jacks and PHONES jack).
1.
From the EFFECTS ROUTING screen, move the cursor to
"MEQ (MASTER EQ)" and press the [ENTER] button.
2.
Use the cursor buttons to select the setting that you want
to edit, and use the value dial to edit its value.