[Shift] Button Operations; [Enter] Button Operations; Saving; Assigning A Name - Roland INTEGRA-7 Owners & Installation Manual

[SHIFT] Button Operations

By holding down the [SHIFT] button and pressing another button,
you can edit the settings of the button you pressed, or access a
specific screen (shortcut).
If you hold down the [SHIFT] button while editing a parameter's
value, the value will change in larger steps.
Shortcut list
Shortcut
[SHIFT] + [PART VIEW]
[SHIFT] + PART [ ]
[SHIFT] + PART [ ]
[SHIFT] + cursor [ ]
[SHIFT] + cursor [ ]
[SHIFT] +
[MOTIONAL SURROUND]
[SHIFT] + [MENU]
[SHIFT] + [EDIT]
[SHIFT] + [ENTER]
[SHIFT] + [EXIT]
[EXIT] + [ ] (startup)
[MENU] + [ ] (startup)
[SHIFT] +
press the [VOLUME]

[ENTER] Button Operations

The [ENTER] button is used to set a value or to execute an
operation.
In the various editing screens, pressing the [ENTER] button will
display a parameter list. Select a value and then press the [ENTER]
button once again to confirm your selection.
Explanation
Accesses the Studio Set select screen.
Select the part 1.
Select the Ext part.
Switch between tabs in screens that
contain tabs.
Accesses the Motional Surround setting
screen without changing the MOTIONAL
SURROUND ON/OFF status.
Accesses the Expansion Load screen.
Accesses the corresponding WRITE MENU
screen for each page.
Switches the display type in the top
screen..
Accesses the DEMO MENU screen.
Starts up the INTEGRA-7 without loading
the expansions.
* Continue holding down [EXIT] button
until the top screen appears.
Returns the LCD contrast and LCD
backlight brightness to their factory
settings, and accesses the LCD contrast
setting screen.
* Continue holding down [MENU] button
until the setup screen appears.
Continues preview playback. Press the
[VOLUME] knob once again to stop.

Saving

From the top screen, hold down the [SHIFT] button and press the
[EDIT] button to access the WRITE MENU screen. Select a studio set
or tone, and save your settings.
From the TONE EDIT screen, hold down the [SHIFT] button and
press the [EDIT] button to save the tone.
From the SYSTEM screen, hold down the [SHIFT] button and press
the [EDIT] button to save the system settings.
Studio Set
Save the Studio Set.
Tone/Drum Kit
Save the Tone/Drum Kit
System
Save overall settings for the INTEGRA-7.

Assigning a Name

The INTEGRA-7 lets you assign names to the following items.
• Studio Set
• Tone/Drum Kit
• Sound data to be exported
• Backup file
Regardless of what you're naming, the procedure is the same.
1.
Press the [ ] [ ] buttons to move the cursor to the
location where you wish to input a character.
2.
Turn the VALUE dial, or press the [DEC] [INC] buttons to
specify the character.
You can use the cursor [ ] [
uppercase and lowercase letters.
3.
If you decide to cancel your input, press the [EXIT] button.

Inserting or Deleting Characters

When entering a name, you can insert or delete characters.
1.
While entering a name, press the [MENU] button.
The Menu screen will appear.
Pressing the [MENU] button once again will take you back to the
previous screen.
2.
Choose "INSERT" or "DELETE," and press the [ENTER]
button.
Function Explanation
Press the [ENTER] button to insert a space (blank) at the
INSERT
cursor location.
Press the [ENTER] button to delete the character at the cursor
DELETE
location; subsequent characters will be moved forward to fill
the gap.
Basic Operation
34
page
40
page
48
page
] buttons to switch between
29