Choosing A Tone; Selecting Tones From A Tone List By Category; Selecting Tones From A Tone List By Type/Bank; Selecting Drum Kits From A Tone List - Roland INTEGRA-7 Owners & Installation Manual

Choosing a Tone

In the PART VIEW screen you can select the tone for each part.
You can view the tone list by category or by type.
Tone Preview function
By pressing the [VOLUME] knob you can audition the tone of the
selected part.
Selecting Tones from a Tone List by
Category
1.
Press the [TONE FINDER] button.
The tone list organized by category will appear.
2.
Use the cursor [ ] [ ] buttons to switch categories.
3.
Use the value dial or the cursor [
a tone, and press the [ENTER] button.
MEMO
By holding down the [SHIFT] button and using the cursor
[ ] [ ] buttons, you can switch to the next (or previous)
type/bank.
Selecting Tones from a Tone List by
Type/Bank
1.
Press the [SuperNATURAL] or [PCM] button.
The tone list will appear.
2.
Use the cursor buttons to switch the type or bank tab.
3.
Use the value dial or the cursor [
a tone, and press the [ENTER] button.
] [ ] buttons to select
] [ ] buttons to select

Selecting Drum Kits from a Tone List

1.
Press the [SuperNATURAL] or [PCM] button.
The tone list will appear.
2.
Use the cursor buttons to select the drum kit tab.
Select the "SN Drum Kit" tab for SuperNATURAL tones, or the "PCM
Drum Kit" tab for PCM tones.
3.
Use the value dial or the cursor [
a drum kit, and press the [ENTER] button.
Playing Sounds
] [ ] buttons to select
31