Table of Contents
Advertisement
Sep. 2012
Verifying the Version
1.
Press MENU.
The MENU screen appears.
2.
Press CURSOR
to select SYSTEM, then press ENTER.
The SYSTEM screen appears.
3.
Press CURSOR
several times to move to the VERSION tab.
The version information is displayed on the screen.
Data Backup and Restore
Operations
Formatting a USB Memory Device
Use the following procedure to format the USB memory device to use for
backing up data.
1.
Insert the USB memory device into the unit.
2.
Press MENU.
The MENU screen appears.
3.
Press CURSOR
and
The UTILITY screen appears.
4.
Select FORMAT USB MEMORY, then press ENTER.
A confirmation message is displayed.
5.
To execute formatting, select OK and press ENTER. To cancel, select
CANCEL and press ENTER.
Data Backup
1.
Format a USB memory device (recommended: M-UF2G) on the unit.
2.
Insert the formatted USB memory device into the unit.
3.
Press MENU.
The MENU screen appears.
4.
Press CURSOR
and
The UTILITY screen appears.
5.
Select BACKUP and press ENTER.
The BACK UP NAME screen appears.
6.
Enter the desired name and press ENTER.
A confirmation message is displayed.
7.
To execute the backup operation, select OK and press ENTER. To cancel,
select CANCEL and press ENTER.
When the message Backup Completed! appears and the display returns
to the original screen, the backup operation has finished.
* An error message is displayed if the data cannot be saved correctly for some
reason, such as insufficient free space on the USB memory device.
Data Restore Operation
1.
Insert the USB memory device containing the backed-up data into the
unit.
2.
Press MENU.
The MENU screen appears.
3.
Press CURSOR
and
The UTILITY screen appears.
4.
Select RESTORE and press ENTER.
A file-selection screen is displayed.
5.
Select the file to restore and press ENTER.
A confirmation message is displayed.
6.
To execute the restore operation, select OK and press ENTER. To cancel,
select CANCEL and press ENTER.
When the message Completed. Please Shut down. appears, the restore
operation has finished.
16
to select UTILITY, then press ENTER.
to select UTILITY, then press ENTER.
to select UTILITY, then press ENTER.
7.
When the operation has finished, restart the unit.
Performing a Factory Reset
Executing a factory reset causes all user data in the unit to be lost. Before
performing the operation, refer to Data Backup and Restore Operations (p.
16) and back up user data.
1.
Turn on the power to the unit.
2.
Press MENU.
The MENU screen appears.
3.
Press CURSOR
and
The UTILITY screen appears.
4.
Select FACTORY RESET and press ENTER.
A confirmation message is displayed.
5.
To execute the factory reset, select OK and press ENTER. To cancel, select
CANCEL and press ENTER.
When the message Completed. Please Shut down. appears, the factory
reset has finished.
* The operation takes several seconds to finish.
6.
When the operation has finished, restart the unit.
Updating the System
Items Required
• Computer
• USB memory device (recommended: M-UF2G)
• Update-use file (obtained via Service Net)
Procedure
1.
Format the USB memory device (recommended: M-UF2G) on the unit.
2.
Copy the update-use file (integra7_up.bin) to the root directory of the
USB memory device.
3.
Make sure the power to the unit is turned off, and insert the USB memory
device.
4.
Hold down SHIFT and turn on the power to the unit.
* Continue to hold down SHIFT until the message start update. appears.
When the message ===update finished.=== appears, the update has
finished.
* The update takes several minutes to finish. Be sure never to turn off the power
before the operation finishes.
5.
When the operation has finished, turn off the power to the unit.
6.
Detach the USB memory device, then turn on the power to the unit and
verify that the version has been updated.
INTEGRA-7
to select UTILITY, then press ENTER.
Advertisement
Table of Contents
