Rear Panel Connections - Roland INTEGRA-7 Owners & Installation Manual

Panel Descriptions

Rear Panel Connections

AC IN jack
Connect the included AC cord here.
MIDI connectors
For connecting MIDI device.
USB COMPUTER port
With a USB cable, you can connect the
INTEGRA-7 to your computer.
22
INPUT L/R jacks (rear)
Use audio cables to connect a synthesizer or other instrument here.
If an instrument is also connected to the INPUT L/R jacks (front), the sounds of both will be mixed.
11
page
44
page
OUTPUT jacks
You can switch the output between
stereo, mono, and 5.1 channel surround.
For details on connections, refer to p. 23.
* Only the A (MIX) L/MONO, R jacks are balanced.
DIGITAL AUDIO OUT connector
This is a coaxial digital output connector. It complies with S/P
DIF specifications. It outputs the same signal as is output from
the OUTPUT A (MIX) jacks.
It provides 44.1/48/96 kHz, 24-bit linear, stereo output.
23
page