Roland INTEGRA-7 Owners & Installation Manual page 19

Recording on a MIDI track
Connect the INTEGRA-7 to your computer as shown in "Connection example 1: A compact production setup" (p. 10).
* Turn the INTEGRA-7's USB-MIDI Thru setting (p. 49) ON.
1.
In the [File] menu, click [New].
The "Create a New Project" dialog box will appear.
2.
In the "Template" area, choose [Normal]; in the "Name" area, enter a name for
your project and then click [OK].
3.
Record a MIDI track in SONAR.
For details on how to record, refer to SONAR's help.
4.
Play back SONAR.
You'll hear sound from the INTEGRA-7.
Recording the INTEGRA-7's sound on an audio track
1.
In the [Insert] menu, choose [Audio Track].
One audio track will be added.
2.
For the input field of the audio track, choose "Stereo INTEGRA-7 IN."
Input field
MEMO
If the input field is not shown, click the track control list and choose "ALL. "
3.
Adjust the recording level.
Put the track in recording-standby mode, then get the INTEGRA-7 to start playing. Adjust the input level of the SONAR so that the level meter
reaches approximately -6 during the loudest passages.
* For details on the recording procedure, refer to SONAR's help.
4.
Record.
Put the track in recording-standby mode, and press the record button of the transport module to begin recording.
Recording-
standby
5.
When the song ends, press the stop button.
Recording will stop, and the recorded sound will be shown as a waveform in the audio track of SONAR.
Track control list
Record
Level meter
19