C.copying Data Between Banks - Roland TR-626 Owner's Manual

Storing Rhythm Patterns in External Mem
The card is now formatted. The bank will change to Bank 2.
*If the Protect Switch is left ON the card cannot be formatted.
c. Copying data between banks
Step 1
Step 2
Step 3
Step 4
68
Any data
in
one bank can be copied to another. Storing and moving
data to and from Bank 1 to Banks 2 and 3 can be done easily. This
method is quicker and more secure than working with audio tapes.
Data can also be moved between Banks 2 and 3.
Turn the Protect Switch OFF before copying data into a memory
card.
While pressing the Shift Key, push the Bank Key (Main Key 14) to
designate which bank will receive the data.
While pressing the Shift Key, push the Copy Key (Main Key 11 ), then
push Main Key (1 to 3) to designate which bank will send the data,
then push the Enter Key.
The data of the bank designated in step 3 will be copied onto the
bank designated in step 2.
Turn the memory card's Protect Switch ON.
*
New data copied onto a location in a bank that has old data will erase
the old data.
*
If you attempt to copy data onto a memory card whose Protect Switch
is ON the following message will appear. The data will not be copied.
Begin again after turning the Protect Switch OFF.
C•-L
I I
L