Using The Internal Sounds - Roland INTEGRA-7 Owners & Installation Manual

03

Using the Internal Sounds

About the INTEGRA-7's screen
When you turn on the INTEGRA-7, the top screen will appear. You can choose the type of top screen (p. 48).
Part number
Tone type
Tone bank
Mute on/off of each part
(p. 30)
Playing SuperNATURAL tones
1.
Press the [SuperNATURAL] button.
The tone of the selected part will change to a SuperNATURAL
tone.
The display will show the SuperNATURAL tone list.
2.
Use the cursor buttons to change the type or the bank.
3.
Use the value dial to select a tone.
4.
Press the [ENTER] button.
The part's tone will be selected.
MEMO
Tone Preview function
By pressing the [VOLUME] knob you can audition the tone of the selected part.
Connecting a MIDI keyboard and performing
Connection example
Keyboard
* Depending on the settings of the connected MIDI keyboard, note messages played on the keyboard might be transmitted on several
channels. Make settings on your MIDI keyboard so that the MIDI output is appropriate.
12
The "*" indicates an edit
Solo on/off of the current
part (p. 30)
OUTPUT
MIDI IN
INTEGRA-7
The "!" indicates use of
sound that's not loaded
Part number
Playing PCM tones
1.
Press the [PCM] button.
The tone of the selected part will change to a PCM tone.
The display will show the PCM tone list.
2.
Use the cursor buttons to change the type or the bank.
3.
Use the value dial to select a tone.
4.
Press the [ENTER] button.
The part's tone will be selected.
OUTPUT A (MIX)
Tone number and tone
name of the current part
Part level meter
External audio input level
To powered speakers
or amp