Usb Midi; Midi Signal Flow; Messages - Roland INTEGRA-7 Owners & Installation Manual

USB MIDI

If you connect your computer and MIDI keyboard to the INTEGRA-7 as shown in the illustration and turn the USB-MIDI Thru ON, you'll be able to use
the INTEGRA-7 as a MIDI interface.
This is convenient when you want to use a MIDI keyboard with DAW software on your computer to create song data.
For details about settings on your computer, refer to the owner's manual of the software you're using.
INTEGRA-7
Rear Panel
MIDI Keyboard
If you want to play the sound generator of the INTEGRA-7 directly from your MIDI keyboard, turn the USB-MIDI Thru OFF.

MIDI Signal Flow

USB-MIDI Thru=OFF
MIDI OUT MIDI IN
Specifying the Output Destination of the Incoming Messages
Here's how to specify whether the MIDI messages received at MIDI IN will be retransmitted without change to computer (the "ON" setting), or will not
be transmitted (the "OFF" setting).
1.
Press the [MENU] button.
2.
Choose "SYSTEM" and press the [ENTER] button.
3.
In the "MIDI" tab, choose "USB-MIDI Thru" and specify the ON/OFF setting.
4.
Hold down the [SHIFT] button and press the [EDIT] button to save the setting.
MIDI IN
MIDI OUT
USB-MIDI Thru=ON
USB OUT USB IN MIDI OUT
Sound
Generator
Section
INTEGRA-7
Using the INTEGRA-7 with Your Computer
Computer
MIDI IN USB OUT USB IN
Sound
Generator
Section
INTEGRA-7
45