Tr2736; Tr2737; Tr2740; Tr2800 - IBM Cognos User Manual

TR2736

Measure measure_name1 has an average time-state rollup with a weighted
measure measure_name2 specified. Both measures must exist in the same data
source in order for the weighted measure to be applied.
The measure used to provide the weighting for another measure is not found in
the same data source. Because Cognos Transformer analyzes one data source at a
time, both measures must exist in the same data source.
Procedure
To avoid this problem, ensure that measures used to weight other measures exist
in the same data source.

TR2737

Measure measure_name1 has an average duplicates rollup with a weighted
measure measure_name2 specified. Both measures must exist in the same data
source in order for the weighted measure to be applied.
The measure used to provide the weighting for another measure is not found in
the same data source. Because Cognos Transformer analyzes one data source at a
time, both measures must exist in the same data source.
Procedure
To avoid this problem, ensure that measures used to weight other measures exist
in the same data source.

TR2740

Measure measure_name has a time-state rollup specified. There is no time
dimension in this model so the time-state rollup setting will have no effect.
This message may indicate that you have inadvertently set a time-state rollup
instead of a regular rollup. Time-state rollups have no effect on models that do not
contain a time dimension.
Procedure
Confirm that the rollups set for the specified measure are defined correctly.

TR2800

Cognos Transformer could not read the connection information for database
database_name from file cs7g.ini.
Cognos Transformer is unable to read the database information for a database that
you are accessing from an .iqd file.
Procedure
Confirm that the entry for the database connection is correctly specified in the
cs7g.ini file.
Appendix C. IBM Cognos Transformer Error Messages
309