Tr2733; Tr2734; Tr2735 - IBM Cognos User Manual

For example, suppose you create a cube group based on the level State in the
Regions dimension. The level contains three categories: California, New York, and
Massachusetts. You cannot then apply a dimension view that suppresses or cloaks
any of those three states.
Procedure
To resolve the problem, redefine either your cube group or your dimension view
so that categories are not suppressed or cloaked.

TR2733

Data Source data_source_name is not associated with any dimensions that are
included in cube cube_name. This data source will be ignored during PowerCube
(.mdc file) generation.
The PowerCube does not contain any dimensions associated with the named data
source. Because measure values are not required, Cognos Transformer ignores the
data source when it creates the cube (.mdc) file.
Procedure
If you want the cube to contain information from the named data source, on the
Dimensions tab of the PowerCube property sheet, include at least one dimension
with which the named data source is associated.

TR2734

All cubes have been disabled. PowerCube (.mdc file) generation is not possible.
All of the PowerCubes in the model are disabled. No cube (.mdc) file can be
created.
Procedure
To resolve the problem, open the PowerCube Status dialog box from the Tools
menu and enable at least one PowerCube so that Cognos Transformer can proceed
with the cube creation process.

TR2735

Measure measure_name1 has an average regular rollup with a weighted measure
measure_name2 specified. Both measures must exist in the same data source in
order for the weighted measure to be applied.
The measure used to provide the weighting for another measure is not found in
the same data source. Because Cognos Transformer analyzes one data source at a
time, both measures must exist in the same data source.
Procedure
To avoid this problem, ensure that measures used to weight other measures exist
in the same data source.
308
IBM Cognos Transformer Version 10.1.1: User Guide