Tr0301; Tr0303; Tr0404; Tr0408 - IBM Cognos User Manual

Procedure
Ensure that the PowerCube Creation box on the General tab of the Data Source
property sheet is selected, if you want this data source processed during cube
generation.

TR0301

There are no columns for AutoDesign to use.
Cognos Transformer is unable to locate columns for use in the AutoDesign
process.
Procedure
Ensure that the columns in the data sources for your model have not been deleted.

TR0303

Cognos Transformer has detected invalid allocation specifications. These allocations
will be removed. Do you want to continue?
A calculated measure was allocated and then deleted from the model.
Procedure
Choose Yes to have Cognos Transformer change the allocation on which the
measure was based to N/A, if the allocation applies to a level, or Constant, if it
applies to an entire dimension.

TR0404

You didn't specify a server data source. Do you want to continue?
This error occurs if you try to generate categories on a UNIX or Linux server but
have not specified a data source that the server can access.
Procedure
To resolve the problem, specify a data source that resides on, or is accessible by,
your UNIX Linux computer.

TR0408

This model was built with a system language setting of language_setting, which
differs from the current setting. The language setting dictates the sorting rules used
in category ordering. Do you want to resort all ordered categories?
This message appears when a model populated on a computer with one language
setting is moved to a computer with a different language setting.
Procedure
Your PowerCube will still generate successfully, despite this warning message.
Appendix C. IBM Cognos Transformer Error Messages
257